Merlin 4 zone Energizer Proftech

Merlin 4 zone Energizer offers what the Wizord 4 has in terms of features, but with remote control through a dedicated keypad. The keypad also allows the user and the installer to program and control the energizer from a remote location. This allows the energizer to be installed near the fence and the keypad to be located where it is most convenient for the user. Additional features that the standard Wizord does not have, can be enabled through the keypad. Bigger and stronger than ever before.
• Siren trigger times and frequency can be adjusted as required
• Voltage outputs can be controlled to reduce or increase the output energy as required by the user
• High and low voltage modes to change the power output of the energizers and yet keep the alarming capability intact
• Gate chime to notify if the gate has been opened and closed
• Bypass options for the siren, strobe and gate as required
• Siren times can be programmed to suit the different needs of the user

Merlin 4 with keypad

Merlin 4i energizers have been field tested for many years and boast unsurpassed reliability. Simple to install and easy to maintain

The Merlin 4i includes a keypad for controlling and programming the energizer. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user. This allows the user to control the energizer remotely, with up to four keypads (EE-MKP).

The Merlin 4i energizer is single zone and offers the following Features

• 3.7 Joule output energy (single zone)
• Robust and flexible design for home and commercial security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Powered by 230V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
• Gate chime available to alert that the gate has been opened or closed
• The fence voltage outputs can be adjusted using the keypad
• The siren and gate outputs can be bypassed using the keypad

Specifications

Enclosure size: L285 x W212 x D120
Weight excluding battery (7AH): 3.1kg
Weight including battery (7AH): 5.3kg
IP rating: IPx4
Operating temperatures: -10°C to 50°C
Operating humidity: < 80% non-condensing
Electrical supply voltage: 240V
Typical power consumption (normal operating conditions): 18VA
Standby time (fully charged battery): 24hrs
Energy output 500 Ohms load: 3.7 Joule
Open circuit voltage: 8 000V